Part numbers to be added to Parts Guide

[naughtika]

Did you get that matched up to the original Chris?

i'll match it up and take photos.. actually i think the air filter thats in my car is ryco..

 

[Guest]

Hi guys!

This is my very first contribution to the club. Hope it helps!! =)

VR-4 trunk emblem (red and chrome) - MR300505
VR-4 trunk emblem (red and black) - MR416355
"4WD" sticker (rear doors) - MR339001

 

[Guest]

Sir Gly and Silicon

Please confirm the part number of your facelift automatic ecu. My facelift ecu number would be MD362895 and facelift tcu is MR470718.

Hoping for your response. Thanks!

 

[leebutts]

Hi guys!

This is my very first contribution to the club. Hope it helps!! =)

VR-4 trunk emblem (red and chrome) - MR300505
VR-4 trunk emblem (red and black) - MR416355
"4WD" sticker (rear doors) - MR339001

Thanks Julian, the list has been updated

 

[king_panther]

Hi everyone,

I had a look for these & didn't see them so here I go ;

Crank Shaft Oil Seal - MD168055
Camshaft Oil Seal - MD372536 (this was already posted) 2 were marked as this, the other 2 were MD133317
Cylinder Head Gasket - MD342320

If anyone is interested seller sti_gc8 on EBay is selling these. I have bought them plus a timing belt & tensioner & OEM Water Pump (this suits 6A12 engines too). All arrived in quick time too.

I hope that helps anyone ?

P.S. What is the purpose of the cylinder head gasket ?

 

[naughtika]

King_Panther, those stuff you got from sti_gc8.. are they genuine?

Because i looked around and didnt get much luck, im getting my dad to run around see what he can come up with.. also if worse comes to worse, I will just have to match up the seal at the auto shop.. when I do get a match.. I'll post up the part number to make things easier..

also head gasket is only used if you're overhauling your engine..

 

[king_panther]

naughtika,

Everything except the water pump had what looked to me to be genuine Mitsubishi labels on them. The water pump was listed as an OEM product anyways, all the rest are listed as genuine.

I took some pics last night. They're pretty crap quality, but it's the best I can do for the time being. You'll notice on 2 of the oil seals the part number has been re-written.

 

[leebutts]

Thanks Brad, I've updated the list, I've assumed the cam shaft seal part number we didn't have was the updated number for the rear seals.

cheers

Lee

 

[naughtika]

do you mind doing all of us members a big a$$ favor?

mind taking it down to autobarn, repco or whatever autoshop closer to you.. and get it cross reference with another part? not just the part number but the exact oil seals itself.. so we can just buy it locally rather than overseas.. or if not.. mind sending me your old ones and I'll pay you $20 for it + postage..

 

[VR4Rocket]

Are you looking for Autobarn to bring in water pumps etc?

 

[king_panther]

I'll actually be going to both Repco & Super Cheap Auto on Saturday. There's no Autobarn near me..

So just repeat for me, coz I am a dummy with this stuff, what exactly did you want me to do ??

 

[hawks]

Mitsubishi # MD752072 - Automatic Gearbox Filter $32.60

 

[SiliconAngel]

Sir Gly and Silicon

Please confirm the part number of your facelift automatic ecu. My facelift ecu number would be MD362895 and facelift tcu is MR470718.

Hoping for your response. Thanks!

Julian, the ECU we have listed is the MANUAL ECU. Auto ECU is MR578136 according to CAPS and the auto VIN that I have. Can you tell me how / where you got those part numbers and I'll try to see what matches up?

Oh I just googled MD362895 and I found a single Japanese auction listing an ECU for a VR4 Type V... Interesting.

EDIT: Thanks Mark, added to guide along with updated Manual and Auto ECUs

 

[Guest]

Julian, the ECU we have listed is the MANUAL ECU. Auto ECU is MR578136 according to CAPS and the auto VIN that I have. Can you tell me how / where you got those part numbers and I'll try to see what matches up?

Oh I just googled MD362895 and I found a single Japanese auction listing an ECU for a VR4 Type V... Interesting.

EDIT: Thanks Mark, added to guide along with updated Manual and Auto ECUs

Sir Silicon

I got them from the half cut I imported from Japan. From a white Legnum Type-S the one with the factory fender flares and carbon dash kit. Actually I imported 2 half cuts the other one is from a pre-facelift auto galant which has a different ecu and tcu number.

The first one I brought to Manila was a manual pre-facelift with a part number MD340289


Sir Silicon, is the VR-4 type V you saw in Google a facelift version?

 

[Guest]

jb20689 - what does TCU stand for, Traction Control Unit?

 

[Guest]

jb20689 - what does TCU stand for, Traction Control Unit?

Transmission control unit sir for tiptronic models. The one below the actual ecu

 

[Guest]

O2 sensor is MD189008 and Mitisubishi say $393 (ouch)

 

[leebutts]

Hey Paul,

O2 sensor is already on there - is that price incl GST?

I'll update the price if it is

cheers

Lee

 

[Guest]

Good question ... not sure, I laughed at that price ...

 

[Guest]

JDM fender flares/overfenders

Hi guys!

Do you happen to know the part number of our factory fender flares? The one with the Type-S. I think they can be ordered as 6 pc set. I got the bumper's and the front fender's, im lacking the rears.

Or is some out there selling his?


Thanks!